|
|
|
 |
|
|
| |
|
|
|
|
| |
 |
| |
| 2.
USB1.1 driver |
| The drive needed
when Momobay CX-1 and/or FX-1A is used with
Windows 98SE. For Win2000 or WinME or WinXP,
no driver is needed. Use only with Win98SE. |
| Products
: CX-1,FX-1A |
 |
|
| 3.
USB2.0 driver |
| The driver
needed when CX-2, FX-2, UX-2 is used as USB2.0
device on Windows 98SE system. For Win2000
or WinME or WinXP, no driver is needed. . |
| Products
: CX-2, FX-2, UX-2 |
|
|
| 4.
Patch driver for increasing firewire stability |
Use this
filter driver SW when you encounter ‘Write
delay error’ or device detachment during
file copy from PC to MOMOBay. This filter
driver slightly(about 5%) reduce the performance
with increased stability.
After run the setup, run the SW and check the ENABLE check box and reboot the PC.
NotePC user or multifunction firewire card
user may experience this kind of errors. |
| Product:
All momobays with FireWire Interface |
|
|
| 5.
RX1 firmware patch for Plextor CD-R/RW user |
This firmware
update solves the finish problem after 100%
writing progress when RX-1 is used with Plextor
CD-R or CD-RW
*
Caution
1.
Power failure during firmware update process
may cause unrecoverable failure to the RX-1.
If this happens, please contact DViCO or your
distributor.
2 The update process takes more than 10 minutes
when OS is Windows 98SE or ME. Please do not
interrupt the process.
3 . Please do not apply this patch when you
are using other brand’ CD-R/RW rather than
Plextor. |
| Product
: RX-1 |
|
| 6.
CX1 1394 firmware patch 1.1 |
| If you encounter
system hang or illegal termination during
ScanDisk or Format at Win2000, use this firmware
patch for CX1. Don't use this SW other than
specified serial No.
* Usage
1) Install this program
2) Reboot
3) Connect CX1
4) Run the program
5) Recycle power of CX1. |
| Product
: CX1 serial No 104101300001~104101304170. |
|
|
7. Momobay Config ROM Patch |
If you encounter
the situation when your system does not recognize Momobay even after you plug out Momobay and plug it back in again.
Ver. 1.10.
|
| Product
: CX-1, CX-1, FX-1A, FX-2 |
|
|
8. Momobay MX-3 Windows98SE/2000 USB Driver |
Download and
install the MX-3 driver.
MX3Win98Driver.exe : Only Windows98SE Driver
MX3Win2000Driver.exe : Only Windows2000 Driver
* For Win2000 ServicePack3(ServicePack4) or
WinME or WinXP, no driver is needed. |
| Product
: MX-3 |
Win98 Driver
Win2000 Driver |
| 1.
Utility SW for MAC OS 8.6.x or OS 9.x.x |
This
SW provides stable firewire driver for classic
MAC OS and some utility functions such as
mount/unmount functionality of MOMOBay and
partition, Initialization.
For more reliable HDD use, initialize HDD
at this utility rather then using MAC native
initialize. |
| Product
: CX1, CX2, FX1A, FX2 |
|
| 2.
Driver SW (For 1394
user only) for OS 10.0.x or OS 10.1.x |
Use this driver
when CX1 does not mount on MAC OS10.0.x or
OS10.1.x which was mounted well at OS9.x.
This driver solves Apple’s bug on firewire
storage login process. The bug fixed at MAC
OS10.2 or above, so don’t use this driver
at OS 10.2.x or above.
Also don’t use this driver other than CX1
with serial No listed below. |
| Product
: CX1 Serial No : 104101300000~104101314024,
104101322930~104101323009 |
|
|
3. Momobay Config ROM Patch |
If you encounter
the situation when your system does not recognize Momobay even after you plug out Momobay and plug it back in again.
This patch file is only for Windows system. So please use Windows system to upgrade your Momobay. Once Momobay is
upgraded using this patch, the upgrade function is available when you use the upgraded Momobay with Mac system. |
| Product
: CX-1, CX-1, FX-1A, FX-2 |
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
